Why does my Bticino AXOLUTE handset not ring when called?
If your Bticino Intercom System handset isn't ringing when called, there are a couple of things to check. First, ensure that the handset and entrance panel are correctly wired and configured. Also, verify that the "Call Exclusion" function is not active, and the bell volume hasn't been set to zero.
What to do if pressing the Entrance panel Activation/Cycling key on my Bticino AXOLUTE Intercom System shows no picture?
If pressing the Entrance panel Activation/Cycling key on your Bticino Intercom System doesn't display a picture, verify that the handset and entrance panel are correctly wired and configured, ensuring they share the same P address. Another possibility is that the audio/video channel is currently in use; wait for it to become available and then try again.
Why is it difficult to hear the caller at the Bticino Intercom System handset?
If you're having trouble hearing the caller at the Bticino Intercom System handset, check the volume setting on the Axolute Video Station. Also, make sure there aren't any strong noise sources nearby. You can also communicate in PUSH TO TALK mode.
What to do if pressing the OK key on my Bticino AXOLUTE Intercom System doesn't switch on the menu and makes a busy sound?
If pressing the OK key on your Bticino Intercom System results in a busy sound and the menu doesn't appear, it's likely that the audio/video channel is currently busy. Please wait for it to become free and try again.
General| Wiring | 2-wire |
|---|---|
| Night Vision | Yes |
| Hands-free | Yes |
| Display | LCD |
| Camera | Color |
To Next Page
