btsr SM-DIN/MULTILOOP/ETH - Page 41

Installation and Connections
SM-DIN/MULTILOOP.. - 2.21 -
DF RAMP UP
Enter the WRK PARAMETERS menu.
Select DF RAMP UP
/
To change the parameter value [1 … 1000 ms] available for each
single position
3 sec to confirm and go back to WRK PARAMETERS menu
DF RAMP DOWN
Enter the WRK PARAMETERS menu.
Select DF RAMP DOWN
/
To change the parameter value [1 … 1000 ms] available for each
single position
3 sec to confirm and go back to WRK PARAMETERS menu
WRK PARAMETERS
→
DF RAMP UP
WRK PARAMETERS
→
DF RAMP DOWN