06/23
15
SLOW MODE
In
SLOW
mode, the counter will not increment if a flaw is detected during a pre-existing (user
adjustable) alarm ON period but will do so if a flaw is detected immediately following an alarm
indication.
Fig 9 – SLOW MODE
VERY SLOW MODE
In
VERY SLOW
mode, the counter will not increment during a pre-existing alarm indication, nor during a
(user adjustable) OFF period thereafter.
Fig 10 – VERY SLOW MODE
RESTART MODE
In
RESTART
mode, detection of a flaw will prolong the existing alarm by the user-set alarm ON period,
but the counter will not increment.
Fig 11 – RESTART MODE
To Next Page
Loading...
