EasyManua.ls Logo

Buderus Logamatic 4321 - Cleaning and Disposal

Buderus Logamatic 4321
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
4
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
12
4.6 Cleaning control
z Clean the control panel with a damp cloth only.
4.7 Disposal
z Dispose of the control panel packaging in an
environmentally-responsible manner.
z The lithium battery in the CM431 module must be
replaced by a heating contractor only.
CAUTION!
RISK OF INJURY/
SYSTEM DAMAGE
due to operator error!
Operator errors can cause injury and
damage to property.
z Ensure that children never operate the
appliance unsupervised or play with it.
z Ensure that only personnel trained to
operate the appliance correctly have
access to it.
WARNING!
RISK OF SCALDING
During thermal disinfection the entire
DHW system is factory-set to be heated to
158
°F (70 °C) (start time: Tuesday night
at 1:00 am (01:00)). Hot water
temperatures above 122
°F (50 °C) can
cause scalding almost immediately
.
z The default start time can be changed
to another time by a heating contractor
if desired (shift work).
z If thermal disinfection is activated,
ensure that a thermostatic tempering
valve is installed as protection against
scalding.
CAUTION!
SYSTEM DAMAGE
from frost.
The heating system can freeze up in cold
weather, if switched off.
z Protect your heating system against
frost damage by draining it and the
DHW piping at the lowest possible
point.

Table of Contents

Related product manuals