Additional programming options
8
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
59
8.2 Creating a new heating program
You may enter up to 42 set points per week and heating zone to create a new
heating program. A single set point comprises three details: weekday, time and
temperature.
The newly created program will be saved under "custom program" and the
relevant heating zone number.
Example:
Monday – Friday,
from 5:00 am (05:00 h) 70 °F (21 °C), from 9:00 pm (21:00 h) 63 °F (17 °C)
Saturday – Sunday,
from 9:30 am (09:30 h) 70 °F (21 °C), from 11:30 pm (23:30 h) 63 °F (17 °C)
z Select a heating zone (Æ Chapter 7.6).
Example: Heating zone 2
z Select the standard program "program selction new" for this heating zone
(Æ Chapter 7.10).
The display shows the blank mask "new set point".
Fig. 20 New heating program
A New heating program "custom program 2"
Monday – Friday
B Saturday – Sunday
1 Day mode
2 Night mode
new set point
--------------
----
at ---
To Next Page
Loading...
