Setup log
13
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
77
13 Setup log
Heating zone assignment
Your heating contractor will, as part of the
commissioning process, assign the individual heating
zones of your heating system, e.g. heating zone 1 =
"l.h. side of the first floor".
Operating values Input range Factory setting Selection
Program selection
family
early morning
evening
morning
afternoon
midday
singles
seniors
new
family
DHW 86 °F – 140 °F (30 °C – 60 °C) 140 °F (60 °C)
Warm weather shut down
(WWSD) temperature
50 °F – 86 °F (10 °C – 30 °C)
summer mode always
winter mode always
63 °F (17 °C)
Day room temperature 52 °F – 86 °F (11 °C – 30 °C) 70 °F (21 °C)
Night room temperature 36 °F – 84 °F (2 °C – 29 °C) 63 °F (17 °C)
Vacation room temperature 50 °F – 86 °F (10 °C – 30 °C) 63 °F (17 °C)
Thermal disinfection yes/no no
Heating zone Assignment
heating zone 1
heating zone 2
heating zone 3
heating zone 4
heating zone 5
heating zone 6
heating zone 7
heating zone 8
To Next Page
Loading...