Additional programming options
8
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
50
8 Additional programming options
This chapter is intended to provide more detailed information to those of our
customers who would like to familiarize themselves further with the functions of
their heating system.
The following pages will explain how to change a standard program, if none of
the preset standard programs (Æ Chapter 7.11) match your lifestyle.
You will learn how to create a new heating program that accurately matches
your personal circumstances.
8.1 Modifying the standard program by inserting/deleting set points
8.1.1 Inserting set points
You can interrupt heating phases by inserting set points (details: Weekday/
time/temperature) into an existing heating program.
Example:
The standard "family" program provides constant heating on Fridays from
5:30 am until 11:00 pm (05:30 h until 23:00 h). Insert two new set points if, for
example, you do not want to heat on Fridays from 10:00 am to 1:00 pm (10:00 h
to 13:00 h).
Your modified program will be saved under the program name "custom" and the
number of the heating zone.
Fig. 16 Inserting set points to interrupt a heating phase
A "family program"
B New program "custom program 2"
1 Day mode
2 Night mode
To Next Page
Loading...