Additional programming options
8
Logamatic 4321/4322 - Technical specifications are subject to change without prior notice.
52
To enter the next set point (e. g. Friday, 1:00 pm (13:00), 70 °F (21 °C)), initially
copy the procedure detailed above.
Press "Back" to return to the permanent display.
USER NOTE
You cannot freely enter any temperature here. Only the factory-set day and
night temperatures are available, which you can, however, modify yourself
(Æ Chapter 6.4).
USER NOTE
Only after all three details (day/time/temperature) have been defined for the
new set point will it be automatically saved under "custom program" and the
heating zone number (here: "2"). The saving process is not shown on the
display. The display shows the blank mask "new set point" for the next set
point.
new set point
--------------
----
at ---
To Next Page
Loading...
