4
Dimensions and connections
Logamax plus GB162- 80/100 kW - Subject to modifications resulting from technical improvements!
10
4 Dimensions and connections
4.1 Without pump group
Fig. 2 Dimensions and connections without pump
group
A(LA) =Flue gas connection; inside diameter 4" (100 mm)
B(AA) =Air intake connection; inside diameter 4"(100 mm)
C(WB) =Wall Bracket (not shown)
D(VK) =Supply; G1½" union nut with female thread
E(GAS) =Gas connection to boiler; Rp1" female thread
F(RK) =Return; G1½" union nut with female thread
G(AKO)=Condensate outlet; Ø 32 mm (1¼")O/D
The required permanent clearances (closet) are:
in front: 1" (25 mm)
right side: 0
left side: 0
above: 6" (152 mm)
The position selected for installation MUST allow
adequate space for servicing in front of the boiler of at
least 16.5" + 20.5" = 37" (940 mm).
Maintain an installation clearance from combustible
construction from hot water piping of at least 1" (25 mm)
C
DFE
G
4.1” (103.5 mm)
38.58” (980 mm)
5.3” (135 mm)
1.4” (35 mm)
5.4” (138 mm)
6.4” (162 mm)
1.54” (39 mm)
5.1” (130 mm)
5.5” (140 m
5.1” (130 mm
AB
0 020.5” (520 mm)
39.5” (1003 mm)
16” (406 mm)
G
D/F
E
A/B
6” (152 mm)
18.3” (465 mm)
0.25” (6 mm)
16.5" (420 mm)
1.2” (30 mm)
24.8” (630 mm)
20.5" (520 mm)
To Next Page
Loading...
