EasyManua.ls Logo

Buderus Logamax plus GB162-100 kW - Parts List

Buderus Logamax plus GB162-100 kW
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Contents
Logamax plus GB162- 80/100 kW - Subject to modifications resulting from technical improvements!
4
Contents
1 Guideline to symbols and safety instructions . . . . 6
1.1 Guideline to symbols . . . . . . . . . . . . . . . . . . . . . . . 6
1.2 General warnings . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.3 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 Regulations and guidelines . . . . . . . . . . . . . . . . . . . . 8
2.1 Massachusetts Installations Only: . . . . . . . . . . . . . 8
3 General information . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.1 Designated use . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.2 Heating system water quality . . . . . . . . . . . . . . . . . 9
3.3 Pump test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.4 Freeze protection . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.5 Tools, materials and further equipment . . . . . . . . . 9
3.6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Dimensions and connections . . . . . . . . . . . . . . . . . 10
4.1 Without pump group . . . . . . . . . . . . . . . . . . . . . . 10
4.2 With pump group . . . . . . . . . . . . . . . . . . . . . . . . . 11
5 Packaging and transportation . . . . . . . . . . . . . . . . . 12
5.1 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.2 Transporting the boiler . . . . . . . . . . . . . . . . . . . . . 12
6 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.1 Requirements for the installation room . . . . . . . . 14
6.2 Requirements for the heating system . . . . . . . . . 14
6.3 Installing the boiler . . . . . . . . . . . . . . . . . . . . . . . . 14
6.4 Water and Gas connection . . . . . . . . . . . . . . . . . 15
6.4.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.4.2 Connecting the pressure relief valve (PRV) . . . . 16
6.4.3 Making the gas connection . . . . . . . . . . . . . . . . . 16
6.4.4 Installing the heating supply and return pipe . . . 17
6.4.5 Installing the pump . . . . . . . . . . . . . . . . . . . . . . . . 17
6.4.6 Installing the condensate trap . . . . . . . . . . . . . . . 17
6.5 Connecting the condensate drain pipe . . . . . . . 18
6.5.1 Connecting the expansion vessel in a
single-boiler system . . . . . . . . . . . . . . . . . . . . . . . 19
6.6 Combustion Air and Ventilation Openings . . . . . 19
6.7 Flue gas adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.8 Installation of the Exhaust and Air Intake system
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.9 Multiple boiler vent terminal clearance . . . . . . . . 25
7 Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . 27
7.1 External connection board connections . . . . . . . 27
7.1.1 Routing the cable through the boiler . . . . . . . . . 27
7.1.2 Low voltage connections . . . . . . . . . . . . . . . . . . . 27
7.1.3 120 VAC connections . . . . . . . . . . . . . . . . . . . . . 28
7.1.4 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7.2 Installing function modules (accessories) . . . . . . 29
7.2.1 Installing function modules in the boiler . . . . . . 29
7.2.2 Installing function modules outside the boiler . . 30
7.3 Electrical wiring diagram . . . . . . . . . . . . . . . . . . . 31
8 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
8.1 BC10 basic controller . . . . . . . . . . . . . . . . . . . . . 34
8.2 BC10 operating instructions . . . . . . . . . . . . . . . 35
9 Start-up procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
9.1 Check for gas leaks . . . . . . . . . . . . . . . . . . . . . . . 41
9.2 Fill the heating system . . . . . . . . . . . . . . . . . . . . . 41
9.3 Fill the condensate trap with water . . . . . . . . . . 42
9.4 Bleed the gas supply valve . . . . . . . . . . . . . . . . . 43
9.5 Check the air/flue gas connection . . . . . . . . . . . 43
9.6 Checking the appliance configuration . . . . . . . . 44
9.7 Measure the gas inlet pressure
(working pressure) . . . . . . . . . . . . . . . . . . . . . . . 44
9.8 Check and adjust the gas/air ratio . . . . . . . . . . . 45
9.9 Carry out a leakage test in operating conditions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
9.10 Check and adjust the flue gases CO emissions 47
9.11 Function test . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
9.12 Measure the ionization current . . . . . . . . . . . . . . 48
9.13 Test the Ignition Safety shut off device . . . . . . . 48
9.14 Boiler settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
9.14.1 Set the heating capacity . . . . . . . . . . . . . . . . . . . 49
9.14.2 Set the space heating water temperature . . . . . 49
9.14.3 Set the pump run-over time . . . . . . . . . . . . . . . . 49
9.14.4 Switch DHW mode ON/OFF . . . . . . . . . . . . . . . 49
9.14.5 Set the DHW temperature . . . . . . . . . . . . . . . . . 49
9.15 Final activities . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
9.15.1 Close the boiler door and the control panel . . . 50
9.15.2 Hand over . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
10 Shutting down the system . . . . . . . . . . . . . . . . . . . . . 51
10.1 Shut down the appliance using the basic
controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
10.2 Shutting down the heating system if there is a
risk of freezing (interruption of use) . . . . . . . . . . 51
10.3 Shutting down the heating system in the event
of an emergency . . . . . . . . . . . . . . . . . . . . . . . . . . 51
11 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
11.1 Prepare the appliance for inspection . . . . . . . . . 52
11.2 Carry out a visual check for general signs of
corrosion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
11.3 Gas valve leakage test . . . . . . . . . . . . . . . . . . . . 53
11.4 Measure the ionization current . . . . . . . . . . . . . . 53
11.5 Measure the gas inlet pressure
(working pressure) . . . . . . . . . . . . . . . . . . . . . . . . 53
11.6 Check and adjust the gas/air ratio . . . . . . . . . . . 53
11.7 Carry out a leakage test in operatingconditions 53
11.8 Measure the flue gases CO emissions . . . . . . . 53
11.9 Fill the heating system . . . . . . . . . . . . . . . . . . . . . 53

Table of Contents

Other manuals for Buderus Logamax plus GB162-100 kW

Related product manuals