Logamax plus GB162- 80/100 kW - Subject to modifications resulting from technical improvements!
3
1 BC10 basic controller receptacle
2 Installation option for room controller, e.g. RC35
3 Cover with user manual compartment
4 BC10 basic controller, can be expanded e.g. by the RC35
room controller
5 Connection box (low-voltage and 120 VAC connections)
6 Fan harness and mains lead of the pump
7 Condensate drain outlet
8 Condensate collector
9 Boiler front door
10 Automatic air vent
11 Retaining clips
12 Air intake for the fan
13 Gas pipe
14 Flue gas pipe
15 Door lock
16 Flue gas sensor
17 Flue measuring point
18 Measuring point for air intake
19 Flue gas connection
20 Air intake connection
21 Fan
22 Gas valve
23 Venturi
24 Burner cover
25 Flow temperature sensor
26 Ionization electrode
27 Sighting glass
28 Glow igniter
29 Safety temperature sensor
30 Heat exchanger
31 Pressure sensor
32 Return temperature sensor
33 Universal Burner Automatic Version 3 (UBA 3)
34 Draw with function module integration options
35 Cover shield
36 Condensate trap
Pump group (scope of delivery)
37 Isolating valve, blue (CH boiler return) with pump, drain
cock, check valve and thermometer
38 Manual gas shut off valve, yellow (GAS)
39 Isolating valve, red (CH boiler flow) with drain cock, pres-
sure gauge and thermometer
40 Pressure gauge
41 Isolating valve
42 Thermometer (optional accessory)
43 Drain valve
44 Safety valve 30 psi (2 bar) (or 50 psi [3.45 bar] = optional)
The pump group also includes an insulation cover (see also
pump group installation instructions).
Low loss header (scope of delivery, single appliance only):
45 Low loss header (not illustrated)
To Next Page
Loading...
