1
Guideline to symbols and safety instructions
Logano G515 – 6 720 647 208 (2014/09)4
1.2 Safety instructions
Danger from failing to consider your own safety in an emergency
such as a fire
▶ Never risk your own life. Your own safety must always take the
highest priority.
Risk due to oil leaks
▶ When using oil as the fuel, national regulations hold the operator
responsible for immediately asking a specialist contractor to remedy
oil leaks the moment they are discovered.
If you smell gas
▶ Close the gas shut-off valve.
▶ If you hear gas escaping, evacuate the affected area immediately.
▶ Open the windows.
▶ Do not operate any electrical switches or equipment such as
telephones, power plugs and doorbells.
▶ Extinguish all open flames.
▶ Do not smoke.
Do not use lighters.
▶ Warn all occupants of the building, but do not ring doorbells.
▶ Call your gas utility company and your local heating contractor from
outside the building. If necessary, notify police or the fire
department.
If you smell flue gas
▶ Switch OFF the appliance.
▶ Open windows and doors.
▶ Inform a trained and certified heating contractor.
Danger of electric shock when the control panel is open
▶ Always de-energize the connection before working on electrical parts
(circuit breaker).
▶ Take provisions against unintentional reconnection.
Danger of poisoning from flue gas if supply of combustion air is
insufficient
▶ Safeguard supply of combustion air.
▶ Do not cover or reduce the size of ventilation openings in doors,
windows and walls.
▶ Safeguard sufficient supply of combustion air also for appliances
installed at a later date, e.g. kitchen exhaust fans, clothes dryers, and
air conditioning units with vent to the outside.
▶ Never operate the appliance if the supply of combustion air is
insufficient.
Combustion air / room air
To prevent corrosion, keep the supply of combustion air / room air free
of corrosive substances (e.g. halogenated hydrocarbons that contain
chlorine or fluorine compounds).
Danger of explosion of flammable gases
▶ Only employ a trained and certified contractor to carry out work on
the gas train.
Explosive and easily combustible materials
Never use or store easily combustible materials (paper, thinners, paints,
etc.) near the appliance.
Installation, conversion
Only have the appliance installed or modified by a trained and certified
heating contractor.
Never modify any parts that carry flue gas.
Never close the outlet of safety valves. Water may be expelled from any
safety valve during heat-up.
Inspection and maintenance
The operator is responsible for safety and environmental compliance of
the heating system.
Sign a maintenance and inspection contract with a trained and certified
contractor, covering an annual inspection and demand-dependent
maintenance. This guarantees high efficiency and environmentally
sound combustion.
Instructing the customer
▶ Instruct customers about the functions and operation of the
appliance.
▶ Inform the customer that they must not carry out any modifications
or repairs.
▶ Only use the boiler for its intended purpose and only when it is in
working order.
Disposal
▶ Dispose of packaging in an environmentally responsible manner.
▶ All heating system components that have to be replaced should be
disposed of in environmentally-responsible manner at an authorized
disposal site.
Other important information
▶ If the system overheats or the gas supply does not shut off, do not
switch off or disconnect the power supply to the pump. Instead, shut
off the gas supply somewhere else separate from the heating system.
To Next Page
Loading...
Need help?
General