Need help?Do you have a question about the Buderus RC30 and is the answer not in the manual?
General| Type | Room thermostat |
|---|---|
| Compatibility | Buderus heating systems |
| Display | LCD |
| Temperature Range | 5°C to 30°C |
| Mounting | Wall-mounted |
| Accuracy | ±0.5°C |
| Protection Class | IP30 |
| Programming | Weekly programming |
Details function modules like MM10 and WM10 for system expansion.
Explains the RC30's operation and the concept of heating curves.
Details outside temp, room temp, and combined control modes.
Explains the necessity of fully open TRVs for proper system function.
Explains the purpose and benefits of using heating programs.
Defines heating circuits and their control with RC30/RC20.
Explains the MM10 and WM10 modules for system control.
Provides practical tips for energy-efficient heating and comfort.
Specifies intended use and highlights important safety notes and warnings.
Instructions on cleaning, disposal, and other important notes.
Identifies and describes the RC30 control elements and buttons.
Explains the RC30 display, LEDs, and flap functions.
Provides a quick guide to setting temperatures and extended functions.
Explains how to switch the heating system on or off via the base controller.
Instructions on how to select the display language for the RC30.
Explains how to adjust the room temperature manually.
Describes switching between automatic and manual modes.
Details how automatic mode switches between day/night modes based on time.
Explains how to use manual day and night modes.
Describes how to set room and domestic hot water temperatures.
Explains DHW heating, single loading, and thermal disinfection.
Lists and explains buttons and general principles for extended functions.
Shows how to view system operating values and parameters.
Instructions for setting date, time, and selecting heating circuits.
Guides selecting, modifying, creating, and managing heating programs.
Covers DHW modes, programs, and circulation pump settings.
How to customize the information shown on the RC30 display.
How to access and navigate the RC30's additional menu.
How to set holiday and bank holiday periods for energy saving.
Calibrating room temp and enabling the party function for extended heating.
Setting pause mode and activating thermal disinfection for hygiene.
Enabling button lock and automatic summer/winter time adjustment.
Automatic adjustment for summer and winter modes and changeover threshold.
Configures preheat phase for gas heat pumps.
Addresses common questions about heating system behavior.
Lists error codes, causes, and remedies for system faults.
To Next Page
