1
MA201435_13.1 [Original Instructions] 6/25/2012
SimpliMet 3000 Automatic Mounting Press
The SimpliMet 3000 is a state of the art mounting press with automatic mold sensing. It is easy to use
and has full programmability, increasing productivity and sample consistency. The automatic mold
sensing detects the mold size and loads the appropriate parameters, eliminating the need to look up
tables.
Select from four Buehler pre-programmed, mold size specific methods or program up to 25 user-defined
methods. The SimpliMet 3000 is for use with all thermosetting and thermoplastic resins including
ProbMet™, KonductoMet™, PhenoCure™, EpoMet™
F & G (epoxies) and TransOptic™.
Warranty
This unit is guaranteed against defective materials and poor workmanship for a period of 24 months or
2000 hours of normal use (whichever comes first), from the date of receipt by the customer. The warranty
is void if inspection shows evidence of abuse, misuse, unsafe use or unauthorized repair. This warranty
covers all Buehler costs associated with the replacement of defective materials (e.g., parts and labor).
If for any reason this unit must be returned to Buehler for warranty service, please contact Buehler
Service at www.Buehler.com or 1-800-283-4537 for prior authorization and shipping instructions.
(If outside the USA or Canada contact your local Buehler Representative.) Please have the following
information available when contacting Buehler:
Customer Purchase Order Number
Buehler Invoice Number and Date
Serial Number
Reason(s) for return
Specifications
20-1435 SimpliMet 3000 Automatic Mounting Press
16” W x 20 ½” D x 22
7
/
8
” H (405 mm x 520 mm x 580 mm)
85 – 264 VAC, 50-60 Hz, 1 Phase
1500 Watt on 220V mains
1500 Watt on 115V mains
1200 Watt on 100V mains
70 db: No Pressure, raising and lowering ram
1200 – 4400 psi ( 80 – 300 bar) in 100 psi (5 bar) increments
1” ( 25 mm), 1 ¼” (30 mm), 1 ½” (40 mm), 2” (50 mm)
0 – 20 minutes in 10 second increments
0 – 30 minutes in 10 second increments
To Next Page
Loading...