Bully Dog 40417 - Available Options - All Models; Change Vehicle; Install Download; Gauge Setup

40417 GT PLATINUM
9
AVAILABLE OPTIONS – ALL MODELS
In general these options are presented in the order they appear on the Main Menu but there are some menus that change
according to the specific vehicle. If options are missing in your Main Menu, update your GT Platinum.
Change Vehicle
This option allows you to choose the type of vehicle that the GT Platinum will be used with. If the tune has already been installed, the
Change Vehicle option cannot be used. Read the "Show Settings" section in this manual for more information about checking to see if the
tune is already installed and, if so, how to uninstall the tune.
Install Download
This option allows you to install the tune to the engine computer in your vehicle. If the tune is already installed, this option will allow you to
return to stock (basically uninstall the tune) or change certain settings that can only be changed by writing a new tune to the ECM. Read the
"Uninstalling - Returning to Stock" section in this manual for more information about the download options and returning to stock.
Gauge Setup
This option will allow you to change which gauges are being displayed on the main gauge screen. Denitions for each type of gauge option
available are listed on the next page.
Changing the Information on the General Display
1. Choose Gauge Setup from the Main Menu.
2. Press the button on the left side of the GT Platinum to highlight the gauge slot you would like to change.
3. Use the buttons on the right side of the GT Platinum to scroll through the dierent functions and highlight the one you want shown on
the General Display.
4. When you are done, use the top left button to go back to the Main Menu and General Display.
NOTE: All of the gauge types may not be available through your vehicle’s diagnostic port (OBDII port). This fact is out of the control of Bully Dog; however, Bully
Dog offers a range of add-on automotive sensors and sensor docking station. Contact Bully Dog or a Bully Dog dealer to learn more.
®
Go Back
Speed
Boost
RPM
Coolant
GAUGE SETUP
Gauge 1
Use the Up & Down Arrows to
Change the Tranny Tune
Pyro 2
Speed
Boost
Set Gauge 1
Set Gauge 2
Set Gauge 3
Set Gauge 4