40417 GT PLATINUM
11
Gauge Setup (available with purchase of additional products)
A/F Ratio 1 & 2
This gauge option shows the ratio of air to fuel. The GT Platinum
will use this information to ensure that your engine is using the
correct ratio to completely burn all of the fuel being used and
maximize performance and eciency.
Only available on Bully Dog Sensor Docking Station part number
40385.
AUX 1, 2 & 3
This gauge option shows the information from sensors connected to
the 0-5V auxiliary inputs on the Bully Dog Sensor Docking Station.
AUX Temp
This gauge option shows the information returned to the Sensor
Docking Station by an optional temperature sensor. The port for
this sensor is marked as 5V out.
Frequency
This gauge option shows the information from a pulsing type of
sensor, like an on-board speed sensor or another optional sensor
that operates on the 0-5kHz 5V pulse range. The port on the Bully
Dog Sensor Docking Station for this gauge option is marked as FN.
The following gauge options are provided to allow the GT Platinum to monitor additional sensors that are only available with
the Bully Dog Sensor Docking Station.
To Next Page
Loading...
