40417 GT PLATINUM
48
INSTALL THE TUNE (HEMI ENGINE VEHICLES)
10. The GT Platinum will prompt
you to turn the key to the RUN
position.
a. Make sure the key is in the
“run” (or “on”) position.
b. Do NOT start the engine.
c. Press Continue.
11. Code 262; proceed to the next step
a. If the GT Platinum does not display code 262, skip to step 16.
12. Remove the microSD memory card from the GT Platinum.
Steps 13-15 must be completed outside the vehicle on a computer with
Internet access.
13. Open the Bully Dog Update Agent.
14. Connect the microSD memory card to the computer.
a. Use the included card reader and a USB port on the
computer.
15. The Update Agent will display a progress bar as it gathers
les.
a. When the Update Agent displays a message that the process is complete,
click OK.
b. Return back to step 4
16. Download Features
‣ The GT Platinum will prompt you to select settings for the “Download
Functions”
‣ Some functions are not available for every vehicle.
CODE 262
EXIT
VEHICLE DATA. Vehicle Data has
been successfully retrieved.
Please disconnect GT and go to the
update agent to continue the
download process. Contact
Technical Support if Problem
continues. www.bullydog.com
866-285-5936
KEY RUN
Continue
TURN KEY TO THE
RUN
POSITION
PRESS CONTINUE
To Next Page
Loading...
