Bully Dog GT - Defueling Parameters

OPERATION
60
Pyro 1 Temperatue Level
Pyro 2 Temperatue Level
Engine Coolant Level
Boost Level
Transmission Temperature
Oil Temperature
Go Back
DEFUEL MENU
Setting: 1600ºF
Setting: 1250ºF
Setting: 210ºF
Setting: 23 PSI
Setting: 260ºF
Setting: 210ºF
DEFUELING PARAMETERS DIESEL VEHICLES ONLY
Set up defueling parameters based on a number of different vehicle parameters. In
this menu you can also turn defueling for vehicle parameters off. The defueling pa-
rameters available are vehicle specific, so not all defueling parameters are available
for every make and model.
Below is a list of all of the defueling capabilities for the GT. All defueling options can be activated at
the same time, all can be turned o, or a mix of on and o. Each defueling option is adjusted individu-
ally to be on or o and set to a particular defueling temperature.
Pyrometer Calibration Procedure:
When setting pyrometer defueling levels it is
important to use our pyrometer calibration
procedure to know what temperatures should
be set. See the pyrometer calibration procedure
in the appendix of this manual.
Press to enter set up menu for
defuel items.
Current setting are displayed in Defuel Menu
Use the Up Down Buttons to scroll up and down
through the dierent sub menu items.
Defueling Features Default Settings
Pyro 1 Temperature Level 1250˚F
Pyro 2 Temperature Level OFF
Engine Coolant Temp Level 220°F
Boost Level OFF
Transmission Temp Level OFF
Oil Temperature* OFF