BUNNING 150HD - Page 10

LOWLANDER HD MK2 & WIDEBODY MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page 5
8.5
8.6
8.7
8.8
8.9
8.10
8.11
8.12
8.13
8.14
8.15
Guillotine Slurry Door – HBD
Guillotine Slurry Door Hydraulic Circuit Drawing
Support Leg
Toolbox
Detachable Spinner Deck – Add-on Option
Handbrake Control
Body Seal Rubbers
Simple Canopy
Hydraulic Border Control
Sludge Cake Build
Weigh Cells Spares
121
122
123
123
124
125
125
126
126
127
128
9.
9.1
9.2
ELECTRICS AND REFLECTORS
Wiring for 12v 7 pin plug
Lighting Components (Lamps & Reflectors)
129
129
130
10.
10.1
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
10.10
10.11
10.12
10.13
10.14
10.15
HEALTH AND SAFETY & POTENTIAL HAZARDS
Hazardous Machinery Warning
Loss of Control
Operation Around Bystanders
Hydraulic Fluid Penetration or Burning
Electrocution
Body Entry
Coupling / Decoupling
Machinery Start Up
Machinery Shut Down
Additional Driver Protection
PTO Connection and Guarding
Personal Protective Equipment
Safety Decal Location
Operating Hazard Area
Warnings
131
131
131
131
131
131
131
132
132
132
132
132
132
133
134
134
11.
12.
13.
14.
15.
15.1
15.2
15.3
WARRANTY
IMPORTANT INFORMATION
NOTES
IDENTIFICATION PLATE
TECHNICAL DATA & SPECIFICATIONS
MECHANICAL DATA & SPECIFICATIONS
MACHINE DIMENSIONS
BOLT TORQUE
135
135
136
137
138
138
139
140
** THIS MANUAL IS THE ORIGINAL INSTRUCTIONS **
All rights reserved. Reproduction of any part of this manual in any form whatsoever without GT Bunning’s express
written permission is forbidden. The contents of this manual are subject to change without notice. All efforts have
been made to assure the accuracy of the contents of this manual. However, should any errors be detected, GT
Bunning would greatly appreciate being informed of them. The above notwithstanding, GT Bunning & Sons can
assume no responsibility for errors in this manual or their consequence.