LOWLANDER HD MK2 & WIDEBODY MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page 135
11. WARRANTY
During the 3 year warranty period any failures which occur due to faulty components or workmanship must
be reported to G.T. Bunning & Sons Ltd before any repairs or replacements of components is carried out.
The warranty period commences on the despatch date from the factory. All parts not guaranteed by G.T.
Bunning & Sons Ltd are covered by the component manufacturer and are subject to their own warranty.
The warranty terms only apply to machines that have been subject to fair wear and tear operation and
where routine maintenance has been carried out.
12. IMPORTANT INFORMATION
When using the speader in conjunction with a tractor which has a fast and slow response control on the
spool valves, check that the control on the spool valve is not in the slow position in respect of the floor
drives, as this will over ride the variable floor speed.
The spreader always runs very quietly when working, if loud banging noises are heard this will mean that
foreign objects are in the material. Obviously the shearbolt may well break. If the shearbolts on the PTO
has not sheared and the noises persists STOP THE SPREADER SWITCH OFF TRACTOR ENGINE and check the
spreader.
From new, it is strongly recommended that you do not use a high pressure cold washer and definatley not a
hot pressure washer to the outside of the spreader for 12 weeks.
This will damage the paintwork whilst normal curing of the paint takes place.
Careful low pressure washing is acceptable.
Do not let manure dry and set on fresh paint for the first 3-4 weeks. During this period it is advisable to
clean the machine after use as instructed.
To Next Page
