LOWLANDER HD MK2 & WIDEBODY MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page 21
1.11.4 EARTH BONDING FOR JUNCTION BOX/ECU
It is recommended that the “Type-C” junction box (PSi systems) or the “Type-E” ECU (Isocan/Isobus
systems) be grounded to the chassis of the spreader. This is to ensure that any voltage spikes (caused by
solenoids shutting down etc.) do not damage the equipment.
This can be done by connecting a wire (as thick as possible) from any 0v screw terminal in the junction
box/ECU to a suitable point on the chassis.
Type-E ECU
To Next Page
Loading...