ENGLISH
- Please verify that the product is complete and free from any damage.
- It is the customer's responsability to select an appropriate device for the
application, ensure the unit is installed correctly, and maintain all components.
- Always check the chemical compatibility of the materials the device is made of
with the fluid in contact and the cleaning products.
- This product should only be installed or repaired according to the standards and
rules in force in the country, by specialist staff using the correct tool.
- When dismounting the device from the pipe, take all the necessary precautions
linked to the process.
- Please observe the relevant safety regulations throughout the operation,
maintenance and repair of the product.
- Always ensure that the power supply is switched off and the pipes / tank do not
contain any pressure before working on the device / system.
- This electronic device is sensitive to electrostatic discharge; To avoid any
damage by immediate electrostatic discharge, pay attention to the requirements
of EN 100 015-1.
- Always protect the device from electromagnetic perturbations, ultraviolet
radiations and, when installed outside, from the effects of climatic conditions.
- If these instructions are ignored or the device is not used according to the
specifications, no liability will be accepted and the guarantee on the device and
accessories will become invalid.
To Next Page
Loading...
