Burkert 8025 - Wiring the Do1 Transistor Output of the 8025 Batch in Wall-Mounted Version, Fed with 115;230 V Ac

57
Electrical installation and Wiring
8.13 Wiring the DO1 transistor output of the 8025 Batch
in wall-mounted version, fed with 115/230 V AC
Only move the selectors when the power supply is off.
Position selector
D
depending on the value of the power supply.
230V
LN
230V
T 250 mA
56789 10
LN
230V
CURRENT
SOURCESINK
BINARY
PE PEPE
PE
DI1
DI2
DI3
DI4
DO4
ISOG
FLOW
SENSOR
L+ L- PE P- P+
NC
Iout
PULSE
DO1
Supply
12..36Vdc
Univ
Batch
(AO1)
SUPPLY
NC
COIL
PULSE
INPUT
NPN/PNP
213PE
+-
SENSOR
SUPPLY
LOAD
+5V
L+
(L+)-12V
COIL/PNP
39K
470
2.2K
SENSOR TYPE
COIL NPN/PNP
DO2
DO3
OFFON
D
+
-
+
-
5-36 VDC
PLC
Connection of the power
supply for the device
Power supply for the PLC
Fig. 36 : NPN wiring of the DO1 transistor output of a 8025 Batch in wall-mounted version, fed with 115/230 V AC
→ Configure transistor output DO1 according to chap. 10.7.19 to 10.7.23.
English
Type 8025 - 8035 - SE35 BATCH