Burkert 8700 - Mfc Operating Modes

35
Operation and function
Type 8710, 8711, 8713, 8715
8.3. MFC operating modes
The MFC can adopt different operating modes:
Operating mode Status of the LEDs
(default setting)
Binary input activation mode This operating mode may be interrupted
or ended by
Standard control mode
(see chap. 8.3.1)
Power indicator (green)
on
Power / Autotune
Communication
Error
• Autotune function
• Safety function
• Set-point value profile
• Control mode
Function
Autotune
(see chap. 8.3.2)
Power indicator (green)
flashing
Power / Autotune
Communication
Error
Input active for at least 0.5 s (permanent
input activation leads to a function restart)
• Safety function
• Device reset
Safety
function
(see chap. 8.3.3)
Limit light (blue) flashing
Power / Autotune
Limit (y)
Error
As long as the input is active -
English