Burkert 8700 - General Information; Description Of The System; Manufacturers Address And International Contacts; Warranty Conditions

7
General information
Type 8710, 8711, 8713, 8715
4. GENERAL INFORMATION
4.1. Manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
F-67220 TRIEMBACH-AU VAL
The addresses of our international sales offices are available on the
internet at: www.burkert.com
4.2. Warranty conditions
The condition governing the legal warranty is the conforming use of
the MFM / MFC in observance of the operating conditions specified
in this manual.
4.3. Information on the Internet
You can find the user manuals and technical data sheets regarding the
type MFM / MFC at: www.burkert.com
5. DESCRIPTION OF THE
SYSTEM
5.1. General description
• Mass flow meter types MFM 8700, 8701, 8703 and 8705 are
devices designed for measuring the mass flow-rate of clean, dry
gases.
• Mass flow controller types MFC 8710, 8711, 8713 and 8715 are
devices designed for controlling the mass flow-rate of clean, dry
gases.
Type of the device Type of sensor
MFM 8700 Capillary/Bypass channel
8701 MEMS
8703 MEMS
8705 Capillary/Bypass channel
MFC 8710 Capillary/Bypass channel
8711 MEMS
8713 MEMS
8715 Capillary/Bypass channel
5.1.1. General operation of the Mass Flow
Meter (MFM)
The MFM integrates a sensor for measuring the flow-rate. The measured
value for the mass flow-rate is transmitted to a remote device via an
analogue or a digital output (field bus).
English