45
Accessories / Spare parts
Type 8710, 8711, 8713, 8715
Types Item Order code
Profibus
versions of
types 8700,
8701, 8710
and 8711
GSD sheet Download from
www.burkert.
com
DeviceNet,
CANopen
version of
types 8700,
8701, 8710
and 8711
Straight M12 plug (code A) 917 115
Straight M12 socket (coupling)
(code A)
917 116
DVN/CAN* Y-piece 788 643
DVN/CAN terminal resistor
(code A)
On request
EDS sheet for DeviceNet Download from
www.burkert.
com
8703, 8705,
8713, 8715
SUB-D 9-pin base
(to be soldered)
917 623
RS232 adapter for connection to
a PC
667 530
Extension cable for Sub-D 9-pin
plug, RS232, 2 m
917 039
USB adapter 670 693
Sub-D 9-pin adapter with
2 terminal blocks (for 2 connection
cables)
919 465
* The two previous M12 connectors cannot be used together on the same
side of the Y-junction. At least one of the two M12 connectors must be a
prefabricated cable with a thinner connector.
10.1.2. Fluid accessories
The MFM / MFC are equipped with a connection plate which uses
a DIN ISO 228/1 thread process connection.
A threaded fitting available as an accessory is used to connect
the device to a line:
• the connection to the device side has a DIN ISO 228/1 thread,
• the connection to the line side is available in a range of
dimensions.
A sealing ring must be ordered for each screw fitting!
Connection
to the device,
with DIN ISO
228/1 thread
Diameter of
the line
Material Order code Order code,
sealing ring
G 1/4 6 mm
Stainless
steel
901 538 901 575
G 1/4 8 mm 901 540 901 575
G 1/4 1/4 " 901 551 901 579
G 1/4 3/8 " 901 553 901 579
Other accessories for the fluid connection of an
MFM / MFC can be found under Type 1013 in the Bürkert
accessories catalog.
English
To Next Page
Loading...
