SETUP MENU
The SYSTEM SETUP menu of the CD player 102 allows the easy programming of certain basic settings.
All settings of the SYSTEM SETUP will be saved automatically after leaving the SETUP and remain after switching
off the unit.
The SYSTEM SETUP can be operated by pressing MENU and the navigation keys ▲, ▼, ►, ◄ of the remote
control.
Activating SETUP Press the button MENU to activate the SYSTEM SETUP. The alphanumeric display will
show SETUP for approx. two seconds, followed by the first menu item.
Select menu item With the navigation keys ► and ◄ you can choose the menu item you want to change.
Change settings With the navigation keys ▲ and ▼ you change the setting of the selected menu item.
Leaving SETUP Pressing the key MENU closes the SETUP MENU and all settings will be saved.
Short description of the menu items which are explained more precisely on the following sites.
MENU ITEM DESCRIPTION DEFAULT
AUTO
The CD player automatically starts playback of the CD
after closing the CD tray or after switching the CD Player
on
OFF
SNR
Shows the type and the serial number of the unit, when
item is set to ON
OFF
RC-I
Setting to YES makes it possible to switch the inputs with
the buttons STATION+/- of the remote control
NO
DEFAULTS
Press the button OK, when you want to load the default
settings
To Next Page
Loading...