PROGRAMMING A FAVOURITE TRACK SELECTION OF A CD
A total of 50 tracks from a CD can be programmed for playback in a selected order. Programming can only be done
using the remote control. The program plays the tracks in the selected order.
Activation To start the program function press the button PROGR. of the remote control. The
alphanumeric display will show PROGRAM shortly and then starts the programming
mode. The display shows now P: 01 T: 00 whereby P stands for program space, T stands
for the track which should be programmed on this program space.
Arranging a program The selection of a track will be done with the arrow button ▲ for the following tracks and
▼ for the previous tracks. Press the button OK of the remote control, if you got the
desired track. This track will be saved on the selected program space. The display shows
then SAVED to confirm the programming. Afterwards the following program space will be
activated for programming.
Selecting a defined Press the key ◄ of the remote control. In front of the program space number an arrow →
program space shows you that you can select a program space. The selection will be done with the arrow
button ▲ for the following program spaces and▼ for the previous tracks.
Programming a track Press the button ► of the remote control. In front of the track number an arrow → shows
that you can choose a track for the selected program space. The selection of a track will
be done with the arrow button ▲ for the following tracks and ▼ for the previous tracks.
Press the button OK of the remote control, if you got the desired track. This track will be
saved on the selected program space. The display then shows SAVED to confirm the
programming. Afterwards the following program space will be activated for programming.
Saving a program To save your favorite track program and leave the programming mode press the button
PROGR. of the remote control. If your programming is invalid, because the content of all
program spaces is 00 for example, the PROGRAM LED (2) remains dark.
If your programming is valid, the PROGRAM LED (2) will light up.
Playback of a program When you have left the programming mode and the PROGRAM LED (2) is on, you can
start your favorite track selection by pressing the button PLAY/PAUSE ►║.
Deleting a program A programmed track selection can be deleted by pressing of the key CLEAR of the
remote control or by opening the sliding cover. If the program is cleared, the PROGRAM
LED (2) turns dark.
If you want to delete a program while being in the programming mode, you also have to
press the button CLEAR. Afterwards the display shows CLEAR?. If you really want to
delete the program, you have to press the button OK.
To Next Page
Loading...
