BURNiT Lambda series - Connecting The Boiler To The Mains Power Supply

TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
10
7.2. Connecngtheboilertothemains
powersupply.
*
Such connecon must be
performed by a technician /
serviceshopauthorizedforsuch
operaons.
+
Cauon! ELECTRIC SHOCK
HAZARD!
- Before opening the unit: switch
o the voltage and secure the
unit against accidental restart.
- Observe installaon instrucons.
Diagram 5.
Connecon of the controller with power supply and peripheral equipment.
Socket X61-usedtoconnectthedisplay
tothecontroller.
Next photo shows how to connect the
mains power supply to the controller.
SocketislabeledX1.
yellow-green
blue
brown
Socket X59isforthepowersupplycable
oftheprimaryairintakeactuator.Socket
X60is forthepowersupplycableofthe
secondaryairintakeactuator.
yellow-green
blue
brown
Socket X44 serves to connect the open
doorsensor.