Important Safety Instructions
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Only use power supply specified by the manufacturer.
This symbol is intended to alert the user to the presence
of important operating and maintenance(servicing)
instructions in the literature accompanying the appliance.
6.Unplug this apparatus during lightning storms or when unused for long periods of time.
7.If an outside antenna or cable system is connected to the product, be sure the antenna or cable
system is grounded so as to provide some protection against voltage surges and built-up static
changes. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode. See figure A.
This symbol is intended to alert the user to the presence
of uninsulated“dangerous voltage”within the product’s
enclosure that may be of sufficient magnitude to consti-
tute a risk of electric shock to persons.
To Next Page
Loading...
