If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting section of these instructions
22
Using your DVD player
Let’s get started
Playing a picture disc
1. The unit will take a few seconds to download the initial data from the
disc the screen will show ‘Loading’ and then the picture menu will be
displayed on the screen.
2. If the player does not automatically start a slide show, press the PLAY
/ PAUSE ( ) button to display the first picture full screen.
3. Press the PLAY / PAUSE ( ) button to pause on a particular picture
and the pause indicator () will be displayed. Press the PLAY / PAUSE
( ) or NEXT () buttons to restart the slide show. At the end of the
slide show the picture menu will be displayed.
4. Press the NEXT ( ) button to advance to the next picture or the
PREVIOUS () button to return to the previous picture
5. To rotate or flip a picture on the screen press the NAVIGATION
() buttons when viewing the picture disc.
6. To select a specific picture, enter the picture number directly using
the NUMBER and ENTER buttons and the disc will start to play from
the picture selected
7. To stop play, press the STOP () button and the slide show will stop
and the screen will show thumbnail sized images.
8. Use the NAVIGATION ( ) buttons to move between the
images or commands on the menu and press the ENTER button to
restart the slide show. If there are more than 8 images on the disc,
highlight NEXT using the NAVIGATION ( ) buttons to display
the next 8 images.
9. To return to the disc menu highlight MENU using the NAVIGATION
() buttons or press the MENU button.
10. To turn the DVD player off at any time move the ON / OFF switch to
the OFF position.
To Next Page
Loading...
