Bush T-701 - Subtitle Function; Search Function

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting section of these instructions
26
Using your DVD player
Let’s get started
Subtitle function (not available on all DVDs)
If viewing a DVD equipped with a multi-subtitle feature this is function
allows a subtitle to be selected from those available on the disc. Press the
SUBTITLE button repeatedly to switch to the next available subtitle. The
subtitle selected will be shown on the screen.
Search function
This function allows a disc to be played from a specific title, chapter or
track; the options available will vary for each disc. For most DVD discs
1. If the DVD is in STOP mode,
 Press the SEARCH button and use the NUMBER buttons to enter the
desired title number that you want the DVD to play from.
 Play will start immediately.
2. If the DVD is currently being played
 To search for a specific chapter in the title being watched, press the
SEARCH button ONCE and use the NUMBER buttons to enter the
desired chapter.
 Press the SEARCH button TWICE to enter the time (hr:min:sec) in the
highlighted field from which the title being watched is required to start
playing.
 Press the SEARCH button THREE times to enter the time (hr:min:sec) in
the highlighted field from which the chapter being watched is required
to start playing.
 Play will start immediately from the point selected.
3. If listening to a CD, press the SEARCH button
 (Disc GO TO:--:--) Press ONCE to enter the time (min:sec) in the
highlighted field from which the disc is required to start playing.
 (Track GO TO:--:--) Press TWICE to enter the time (min:sec) in the
highlighted field from which the track is required to start playing.
 (Select Track:--:--) Press THREE times to enter the track number.
 Play will start immediately from the point selected.