4
EN
Fig. 1: BWT THERO 90PRO – front side of the
device
Fig. 2: BWT THERO 90PRO – back side of the
device
1.2 Scope of delivery
The reverse osmosis device is supplied with
the following (Fig. 1 and Fig. 2):
1 RO cartridge
2 Device ON/OFF switch
3 Top service cover for blending valve (initi-
al setting “0”)
4 Bottom service cover for attaching/
detaching the RO cartridge
5 Feed water connection 3/4"
6 Permeate connection 1/4"
7 Concentrate connection 1/4"
8 BWT tap with connection material
Optionally available:
RO replacement cartridge (item no. 812829)
1.3 Manufacturer's address
BWT water + more GmbH
Walter-Simmer-Straße 4
5310 Mondsee, Austria
Telephone: +43/6232/5011–0
Fax: +43/6232/4058
E-mail: warewashing@bwt-group.com
1.4 General information
This installation and operating manual (IOM)
contains important instructions for safe and
efficient use of the reverse osmosis device
BWT THERO 90PRO. This installation and op-
erating manual (IOM) is part of the device and
must be constantly available at the place of
operation for all staff members assigned.
1.4.1 Reading the installation and operating
manual (IOM)
The staff must have read and understood
this IOM prior to any work being carried out.
A basic precondition for safe working is the
adherence to all stated safety and operating
instructions.
In addition, the local accident prevention pro-
visions and the general safety provisions
effective at the place of operation are
applicable. The illustrations in these instruc-
tions are intended to provide a basic under-
standing and may deviate from the actual
design of the device. Justified claims cannot be
derived from the same.
3
1
4
7
5
6
2
8
To Next Page
Loading...
