4-1 Charging Instructions 95
● For the single-phase AC charging box delivered with the vehicle or
public AC charging pile without setting options, this step can be
omitted;
● For public AC charging pile/box with setting options, to use it, swipe
your card or scan the QR code on it. For specific operation, refer to
the charging pile/box instructions.
■ The charging plug connected indicator on the combination instrument
will illuminate.
■ In the charging process, relevant charging parameters and charging
animation will be displayed on the combination instrument.
● In this condition, preset charging can be set via the instrument. Refer
to setting procedure of preset charging function on the combination
instrument for details.
● When the battery SOC is low, the preset charging function will not be
available.
3. Guidance on stopping charging
■ End charging:
● The charging equipment can be set to end charging in advance or
end charging automatically when the vehicle is fully charged.
■ Disconnect the charging port connection:
● Disconnect the charging port with reference to AC charging with
household portable equipment.
■ Disconnecting the power supply plug:
● If the 7-pin to 7-pin equipment is used for charging, it is
recommended to pull out the charging plug before pulling out the
power supply plug;
● If the charging box delivered with the vehicle is used to charge the
vehicle, this step can be omitted;
● If an AC charging pile equipped with a charging plug is used to
charge the vehicle, this step can be omitted.
■ Close the A/C charging port protection cover and charging port cap (with
reference to AC charging with household portable equipment).
■ Sort and properly place the charging equipment.
● If the AC charging pile/box is used for charging, place the charging
To Next Page
