96 4-1 Charging Instructions
plug in the designated position of the charging pile/box;
● If the 7-pin to 7-pin equipment is used for charging, sort and place it
properly.
● Do not let the 7-pin to 7-pin equipment fall from height. Do not move the
charging equipment by directly pulling the cable. Handle it gently and put it
at a cool and shaded place after use.
DC charging through charging pile
1. Description of equipment
■ The AC charging piles in public places can be used to charge the
vehicle. Generally, AC charging piles are installed at designated
charging stations.
■ Specifications of equipment: Please refer to relevant description of
the charging pile.
■ Charging time: Please see the charging time prompt displayed on the
combination instrument.
2. Guidance on charging operation
DC charging can be performed by connecting the vehicle to a DC charging pile
through the charging plug of the DC charging pile.
Instant charging method:
■ Before charging, make sure the
vehicle power is in the OFF mode.
■ Opening the charging port cap and
charging port protection cover:
● Press the red area shown in
the figure to open the charging
port cap.
■ Connecting vehicle charging port:
● Connect the charging plug of the charging pile to the charging port of
the vehicle and lock it securely.
■ Follow the steps of charging equipment instructions to start charging.
■ The charging plug connected indicator on the combination instrument
will illuminate.
■ In the charging process, relevant charging parameters and charging
To Next Page
