Need help?Do you have a question about the BYD EPS14Pi and is the answer not in the manual?
General| Rated Load | 1400 kg |
|---|---|
| Load Center Distance | 500 mm |
| Lifting Height | 3000 mm |
| Fork Length | 1070 mm |
| Overall Height (Mast Lowered) | 1990 mm |
| Battery Voltage | 48 V |
| Wheelbase | 1400 mm |
| Lifting Speed (laden/unladen) | 0.3/0.48 m/s |
| Lowering Speed (loaded/unloaded) | 0.45/0.4 m/s |
Explains the manual's purpose, how to use it, and important tips.
Outlines the inspection process and checks required when receiving a new forklift.
Provides guidance on operator qualifications, training, and general safety compliance.
Specifies requirements for forklift operators, including licensing and testing.
Highlights immediate hazards and severe consequences of non-compliance.
Explains the purpose of warning signs and procedures for replacement.
Illustrates the forklift with numbered parts and a comprehensive list of components.
Presents a detailed table of the forklift's technical specifications and dimensions.
Specifies recommended environmental conditions for operation and safe storage.
Describes the vehicle and battery nameplates and their importance for identification.
Explains how lift height affects load capacity with a graphical representation.
Covers ignition switch, emergency stop, guardrail, and pedal operations.
Illustrates and lists the functions of the control handle components.
Explains how to drive, steer, and brake the forklift.
Details the operation of lifting and lowering the pallet forks.
Details the functions of the display screen and indicators for Type A instrument.
Describes the display screen and indicators for Type B instrument.
Offers guidelines and warnings for driving the forklift with loads.
Explains the procedure for charging the forklift battery.
Covers the procedures for loading, transporting, and unloading the forklift.
Procedures for storing and restarting the forklift after a period of inactivity.
Details daily inspection items and frequency for the forklift.
Outlines regular maintenance schedules based on time or operating hours.
Pre-maintenance steps including positioning and securing the forklift.
Instructions for towing a forklift with faulty electric parts.
Focuses on chassis maintenance, specifically balance adjustments.
Maintenance procedures for the forklift's mast, including chains and clearance.
Maintenance procedures for the forklift's hydraulic system.
Maintenance checks for the forklift's electrical system, including circuits and controllers.
Provides schematic diagrams for the forklift's hydraulic and electrical systems.
Lists fault codes, their alarms, and corresponding remedies for troubleshooting.
Continues the list of fault codes, alarms, and remedies for troubleshooting.
Continues the list of fault codes, alarms, and remedies for troubleshooting.
Continues the list of fault codes, alarms, and remedies for troubleshooting.
Provides contact details for BYD Forklift, including addresses and phone numbers.
To Next Page
