CAB PS5 - Printer Configuration; Machine Parameters; Print Parameters

16 165 PrinterConguration
Machine Parameters
 Press the menu button.
 Select Setup > Machine param..
Parameter Meaning Default
Demand sensor
Congurationofthepeel-offparametersfor
devices with peel-off function.
> Peel position
Shift the position of the dispensed
label relative to the dispensing
edge.
The Peel position can also
be set via software. The offset
values from the Machine param.
menu and the software are added
together.
0,0 mm
> Backfeed
delay
Delay time between removing the
label from the peel position and the
backfeed of the label.
250 ms
> Limit
peel-off spd.
Limitation of the print speed in
the peel-off mode to 100 mm/s
(203/300 dpi) respectively 50 mm/s
(600 dpi)..
On
Table 3 Parameters of the menu Setup > Machine param.
> Demand sensor
Print Parameters
 Press the menu button.
 Select Setup > Print param..
Parameter Meaning Default
Backfeed
Method for backfeeding the label medium.
Backfeeding is necessary in the peel-off mode
since the front edge of the following has already
passedtheprintlinewhenpeelingofftherst
label
always: Backfeeding occurs independently of
label contents.
smart: Backfeeding only occurs when the next
label is not yet fully prepared when peeling off
the current label. Otherwise, the second label is
pushed on and completed after removal of the
rstlabelwithoutbackfeeding.
smart
Table 4 Parameters of the menu Setup > Print param.
> Backfeed