CAB PS5 - Product Description

52 Product Description
In peel-off mode print jobs will by split in cycles with the following steps:
• A label will be printed, peeled-off from the liner and presented in the peel
position.
The print job stops.
• The label will be removed from the peel position.
Then depending on the printer settings a label backfeed will be carried
out. That way the front edge of the next label will be fed back ahead of the
printing line.
The cycle will be repeated till the end of the print job.
The possibilities to control the peel-off mode are depending from the used
PS module type.
PS5 PS6 PS6V PS8 PS9
Peripheral interface for external
control of the peel-off mode
x x x - -
Detection of the label in the peel
position by an optical sensor
- x x x x
Sensorpositionxed - x - x -
Sensor position variable - - x - x
Distance operating point of the
sensor to the paper edge (mm)
- 8 10 - 22 8 Customer
specic
Table 1 Functions