6907 Input Channel 5-11
Revision J2005-2 J-Type
81517 53G%#3DG
The “-20dB” switch puts a 20dB attenuation pad in series with the I/P signal.
81518 3KDVH#&KDQJH
Use this switch to change the phase of the I/P signal 180 degrees.
81519 ,QVHUW
All input channels have a Send and Return break-jack facility placed before the
Equalizer. This is to allow the channel signal to be sent out to, and returned from an
external processing unit. A relay is used to switch the insert function in and out. The
relay is controlled by the insert (INS) switch. When the insert switch is not selected,
the channel signal is passed directly from the input stage to the EQ.
Press INS to divert the channel signal to an external device and have the processed
signal inserted into the channel path.
8151: 7;9#3KDQWRP#3RZHU
The 48V switch connects phantom power to the I/P line. It can be used to supply
“power” to most makes of capacitor microphones.
8151; 5RXWLQJ#WR#6XE#*URXSV
Sixteen switches for routing the input signal to one or all of the available sub groups.
8151< 3$1#,Q22XW
Press the PAN switch to put the PAN control in circuit.
815143 3$1
When the PAN control is in circuit, the input signal can be “panned” between any pair
of odd and even sub groups.
To Next Page
Loading...