7. Press ENTER.
8. Press or to scroll to YES to accept changes and press ENTER.
9. Press ESC twice to return to the global display.
Battery Service Counter
The analyzer can be programmed to notify after it has serviced a specified number
of batteries. This can be useful, for example, as a reminder to perform routine
maintenance tasks such as voltage calibration.
The counter can be restarted from 0 (zero).
To set the battery service counter
1. From the global display, press MENU.
2. Press or to scroll to OPTION CONTROLS and then press ENTER.
3. Press or to scroll to SET SERVICE COUNTER and then press ENTER.
4. Press or or use the number pad to enter the number of batteries
to service before the analyzer provides notification.
Set the number to 0 to disable the battery service counter.
5. Press ENTER.
6. Press or to scroll to YES to accept changes and press ENTER.
7. Press ESC twice to return to the global display.
To restart the battery service count
1. From the global display, press MENU.
2. Press or to scroll to OPTION CONTROLS and then press ENTER.
3. Press or to scroll to CLEAR SERVICE COUNTER and then press
ENTER.
4. Press ENTER.
Cadex Electronics Inc. C7000-C Series Battery Analyzers .
70
To Next Page
Loading...
Need help?
General
