Using the Simulator
46
CAEEndoVR
PN: 165K400000
Ending a Simulation
The EndoVR simulator has multiple ways in which a simulation can end.
In some cases, the learner makes a procedural error and is unable to correct the error within the
allotted time for the simulation. Certain task parameters affect what types of injuries or errors are
acceptable and correctable within a simulation. If a learner performs a fatal error, the simulation will
end before the time expires.
In other cases, the learner completes the procedure before the allotted time has expired and the
simulation ends.
Learners also have the option to stop a simulation at any time during the procedure.
To end a simulation manually, from the simulation screen, click the Continue button.
The Simulation Screen
Note: Some modules do not contain a Continue button.
To Next Page
Loading...