Starting an ESD Simulation
68
CAEEndoVR
PN: 165K400000
The CAMERA button allows you to toggle between the different view modes which impacts the view
that is presented on the left-hand-side monitor.
The ZOOM menu has the simulation software buttons:
When you select the Third-Person Camera button, arrow controls will appear to the
right of the Third-Person Camera button. You can adjust EXTERNAL VIEW perspective
by moving the camera angle up, down, in a clockwise direction or in a counterclockwise
direction with the help of the arrow controls.
The Increase Zoom button allows you to increase the total magnification of the
ENDOSCOPIC VIEW. You can increase the total magnification to 2X, 5X or 10X.
Note: The default magnification is 1X.
The Decrease Zoom button allows you to decrease the total magnification of the
ENDOSCOPIC VIEW. You can decrease the total magnification to 1X, 2X or 5X.
Note: The Decrease Zoom button is disabled at the start of the simulation since the
default magnification is 1X.
To Next Page
Loading...