Calculated Industries DigiRoller Plus II - Page 28

26 — DigiRoller
™
Plus II
Remember to press [RESET] to begin each new measurement.
Step: Key:
(Area #1)
Roll length and store [L]
[RESET]
Roll width and store [W]
[RESET]
Find area [LxW]
Store as Area #1 [Area#]
[RESET]
(Area #2)
Roll length and store [L]
[RESET]
Roll width and store [W]
[RESET]
Find area [LxW]
Store as Area #2 [Area#]