Calculated Industries ElectriCalc Pro - Voltage Drop Keys

Pocket RefeRence Guide — 11
(cont’d)

Wire Resistance
(Wire Res) —
Displays
the Wire Resistance per
1,000 Feet.
Grounding Conductor Keys

Ground — Displays the
Copper and Aluminum
grounding electrode sizes
given an entered Wire
Size. Also shows Wire
Circular Mils and NEC
reference with additional
key presses.

Equipment Ground
(EqGrnd) — Provides
the Copper Equipment
Ground size given an
entered Wire Size.
Additional key presses
show Aluminum Ground
Size and the NEC
reference.
Fuse/Breaker Keys

Overload Protection
— Enters a percent
Overload Factor and
shows the Overload
required based on stored
Amps. The percent
multiplier is shown on the
second key press.