Calculated Industries ElectriCalc Pro Pocket Reference Guide

Pocket RefeRence Guide — 7
Mode Set-up Keys

Prefs — Use to
dene calculator modes.

1Ø — Sets calculator to
Single-Phase mode.

3Ø — Sets calculator to
Three-Phase mode.

Amb° — Enters ambient
temperature for nding
Wire Sizes.

Copper/Aluminum
(Cu/Al) — Toggles
between Copper and
Aluminum Wire.

Free Air (FrAir) — Sets
calculator to Free Air
mode.

60°C Wire Insulation —
Sets to 60°C Wire.

75°C Wire Insulation —
Sets to 75°C Wire.

90°C Wire Insulation —
Sets to 90°C Wire.
Electrical Keys

kilo- — Used to identify
“kilo-” values.

Calculated Industries ElectriCalc Pro Specifications

General

Type	Scientific
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Yellow
Digits	8 digits
Display type	LCD
Display tilting	No
Display size (HxV)	15.88 x 63.5 mm
Display number of lines	- lines
Display size (HxV) (imperial)	0.625 x 2.5 \
Storage media type	-
Battery type	CR2016
Power source	Battery
Battery voltage	3 V
Number of batteries supported	1

Weight and Dimensions

Depth	16 mm
Width	76 mm
Height	142 mm
Weight	127.5 g