Finding Area
1 ) Roll the fi rst dimension and
p ress [ M 1 + ]. A small “M” w i l l
appear in the scale box display
and the main display will reset to
z e r o (0).
2 ) Roll the second dimension and
p ress [ M 2 x ]. The main display
will reset to zero .
3 ) P r ess [Rcl] [M2x]. The fi rst pre s s
d i s p l ays the linear value stored in
this re gi s t e r. The second pre s s
will calculate and display the
a re a .
Rolling or Setting Height
Note: Once you have a value stored for
height, you do not need to re -
p r ogram it unless you want to
change it.
To set or roll in a height:
1 ) To set a height,skip to step 2.To
roll in a height, roll the desire d
d i m e n s i o n .
2 2 – Scale Master
®
C l a s s ic v 2 . 0
To Next Page
Loading...
