Calculated Industries Scale Master Classic - Page 6

[M1+] – Memory Add key
Adds the displayed value to memo-
ry. When this key is pre s s e d , t h e
value on the display is added to
m e m o ry, the display cl e a rs to “ 0 ”
and an indicator (M) lights.When in
the pro g ramming mode for height
or custom scales,this key adva n c e s
the flashing digit or units.
[M2x] – Memory Add key
S t o r es displayed value in memory.
When this key is pre s s e d ,the va l u e
on the display is added to memory,
the display cl e a rs to “ 0 ”and an indi-
cator (M) lights.
[Reset] — Reset key
Resets the display to zero .W h e n
p ressed simu l t a n e o u s ly with an-
other key,it cl e a rs the value of that
re gister (for ex a m p l e , [Reset] [M1+]
cl e a rs the value stored in the mem-
o ry re gi s t e r ) .
6 – Scale Master
®
C l a s s ic v 2 . 0