Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.. Page 24 of page 38
CALIX 2364 ONT INSTALLATION GUIDE
3 - 2364 ONT I
NSTALLATION
S
TEPS
8. Close the lever with the screwdriver, as shown in Figure 3-13. An audible click indicates a completed, secure connec-
tion.
Figure 3-13: Completed, Secure Connection
9. Individually insert each conductor and rotate it into position. Once all the conductors and their associated IDC contacts
have been rotated into position the connector should appear like Figure 3-14.
Figure 3-14: Contacts Rotated into Proper Position
10. The maximum length of the DC drop is determined by the gauge of the power wire used. The power plug is limited to a
maximum gauge of 16AWG. Larger gauges can be supported by compatible lugs. Contact Calix for details.
To Next Page
Loading...