5 - Manual FA01310-EN - 02/2020 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
PRODUCT DATA AND INFORMATION
Key
This symbol shows which parts to read carefully.
This symbol shows which parts describe safety issues.
This symbol shows what to tell users.
The measurements, unless otherwise stated, are in millimetres.
Description
801MS-0020
BX704AGS - Operator complete with control board with programming display, built-in radio decoder, movement and obstruction-detection device and mechanical
limit switches for sliding gates weighing up to 400 kg that are up to 14 m in length.
801MS-0030
BX708AGS - Operator complete with control board with programming display, built-in radio decoder, movement and obstruction-detection device and mechanical
limit switches for sliding gates weighing up to 800 kg that are up to 14 m in length.
801MS-0021
BX704ALS - Operator complete with control board with programming display, built-in radio decoder, movement and obstruction-detection device and mechanical
limit switches for sliding gates weighing up to 400 kg that are up to 14 m in length.
801MS-0031
BX708ALS - Operator complete with control board with programming display, built-in radio decoder, movement and obstruction-detection device and mechanical
limit switches for sliding gates weighing up to 800 kg that are up to 14 m in length.
801MS-0060
BX708RGS - Operator complete with control board with programming display, built-in radio decoder, movement and obstruction-detection device and mechanical
limit switches for sliding gates weighing up to 800 kg that are up to 14 m in length.
Intended use
Sliding gate solution for residential buildings
Any installation and/or use other than that specified in this manual is forbidden.
To Next Page
Loading...
Need help?
General
