9 - Manual FA01310-EN - 02/2020 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Operating cycles
The operating cycle calculation considers a gate that is of standard length (the sliding part), professionally installed, free of any mechanical issues and/or accidental
friction points, and measured at an ambient temperature of 20°C, as stated in EN standard 60335-2-103.
MODELS BX704AGS BX708AGS BX704ALS BX708ALS BX708RGS
Cycles/hour (no.) 17 17 17 17 17
Consecutive cycles (no.) 6 6 6 6 6
Standard reference length of the
sliding part (m)
44444
For gates where the sliding part is of a different length to the standard measurement, please see the graphs.
Cycles/hour graph
A
Number of cycles
B
Gate length
0
5
10
15
20
25
30
22,533,544,555,566,577,588,599,51010,5
20°C 55°C
Consecutive cycles graph
20°C 55°C
0
1
2
3
4
5
6
7
8
9
10
11
22,533,544,555,56
To Next Page
Loading...
Need help?
General
